CBNLD - COTE-ALL MULTIPURPOSE ENAMEL, 33000

  • MSDS: CBNLD
  • Manufacturer: MCCORMICK PAINTS
  • Product Name: COTE-ALL MULTIPURPOSE ENAMEL, 33000
  • National Stock Number: 8010-00N071251
Product Identification

Product ID:COTE-ALL MULTIPURPOSE ENAMEL, 33000
MSDS Date:12/15/1993
FSC:8010
NIIN:00N071251
MSDS Number: CBNLD

Responsible Party
MCCORMICK PAINTS
2355 LEWIS AVE
ROCKVILLE, MD 20851
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 301-770-3235

Cage: 0EKH6

Contractor
MCCORMICK PAINTS
ROCKVILLE, MD 20851 US

Telephone: 301-770-3235

Cage: 0EKH6

Ingredients

2 @ 68F

Fraction By Weight: 40%

OSHA PEL N/K

ACGIH TLV: N/K


NUISANCE PARTICULATES SUCH AS INGS 3 & 4

RTECS: 9999999ZZ

OSHA PEL N/K

ACGIH TLV: N/K


TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HEADACHE, DIZZINESS, NAUSEA,
EYE IRRITATION. SKIN CONTACT: PROLONGED OR REPEATED LIQUID WILL DRY
AND DEFAT SKIN LEADING TO IRRITATION AND DERMATITIS. EYE CONTACT:
DIRECT EYE CONTACT WILL CAUSE EYE IRRITATION. CHRONIC: LOSS OF
APPETITE, NOSE BLEEDS. REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OCCUPATIONAL OVEREXPOSURE TO SOLVENTS
WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
Medical Cond Aggravated by Exposure:SKIN CONTACT: PROLONGED OR REPEATED
LIQUID CONTACT WILL DRY AND DEFAT SKIN LEADING TO IRRITATION AND
DERMATITIS. EYE CONTACT: DIRECT EYE CONTACT WILL CAUSE EYE
IRRITATION.

First Aid

First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: IMMEDIATELY FLUSH EYES
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES; CALL MD. INGESTION:
DO NOT INDUCE VOMITING; CALL MD; DRINK 1 OR 2 GLASSES OF WATER.
INHALATIO N: REMOVE TO FRESH AIR, RESTORE BREATHING, CALL MD.

Fire Fighting

Flash Point Method:TCC
Flash Point:108F,42C
Lower Limits:1.0%
Extinguishing Media:FOAM, DRY CHEMICAL, WATER FOG, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER MAY BE HELPFUL APPLIED AS A SPRAY OR
MIST TO COOL CLOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAMES.

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. KEEP PEOPLE AWAY.
REMOVE WITH INERT ABSORBENT. PROVIDE ADEQUATE VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CNTNRS CLSD WHEN NOT IN USE.
AVOID CNTCT W/SKIN & EYES. PROVIDE ADEQ VENT. KEEP OUT OF REACH OF
CHILDREN. DO NOT TAKE INTERNALLY. AVOID (SUPDAT)
Other Precautions:THIS COATING CONTAINS MATLS CLASSIFIED AS NUISANCE
PARTICULATES, FOR EXAMPLE TITANIUM DIOXIDE, CALCIUM CARBONATE, ETC
WHICH MAY BE PRESENT AT HAZARDOUS LEVELS ONLY DURING SPRAYING OF
THIS COATING, OR SANDING OR ABRADING OF THE DRIED FILM.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED CANNISTER OR AIR HOSE MASK
IF TLV IS EXCEEDED. IF MATERIAL SPRAYED AND TLV NOT EXCEED USE
NIOSH/MSHA APPROVED DUST MASK.
Ventilation:VENTILATE WORKING SPACES TO BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . USE
CHEM-RESISTANT APRON OR OTHER CLTHG IF NEEDED TO AVOID RPTD
(SUPDAT)
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING BATHROOM.
Supplemental Safety and Health
HNDLG/STOR PRECS: OPEN FLAMES, SPARK SOURCES & HIGH TEMPERATURE AREAS.
OTHER PROT EQUIP: OR PRLNGD CONTACT.

Chemical Properties

Boiling Pt:B.P. Text:>318F,>159C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.282
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
SMOKE.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.